Product Selection for Engine Protection Application
[Go back to selectors for other applications]
To help you select the best product for your application, there are two or three tables on this page. These tables list:
- First choice products for "Engine Protection"
- Products which are good for a restricted range of fluids [table may not be present]
- Products which can be used if none of the others are suitable
In each table you will see listed some key parameters. Select the parameter [e.g. dimensions] you want and look down the list. When you have found that product which best fits your needs, then click on its name to see the full data sheet.
| Product | Picture | Product Group | Max pressure | Max Temp | Dimensions | Capacity | Thread | Weight |
|---|---|---|---|---|---|---|---|---|
| F1-Core |  | inline | na | 500C | 18mm x 8 mm [0.7" x 0.314"] | size dependant | na | size dependant |
0
| Product | Picture | Product Group | Max pressure | Max Temp | Dimensions | Capacity | Thread | Weight |
|---|---|---|---|---|---|---|---|---|
| Midi |  | inline | 104barg (1500psig) | 120ºC (248ºF) | 98mm x 73mm (3 7/8" x 2 7/8") | 45g (1½oz) | SAE-12 | 480g (1lb 2oz) |
| Max |  | inline | 104barg (1500psig) | 120ºC (248ºF) | 108mm x 107mm (4 1/4" x 4 1/4;") | 80g (3oz) | SAE-20 | 1170g (2lb 10oz) |
| Module |  | inline | 103 barg (1500psig) | 120ºC (248ºF) | 130mm x 88mm (5 1/8" x 3½") | 150g (5oz) | 1" BSP | 1.23 kg (2lb 11oz) |
| Module Steel |  | inline | 146 barg (2125psig) | 120ºC (248ºF) | 130mm x 88mm (5 1/8" x 3½") | 150g (5oz) | 1" BSP | 1.6 kg (3lb 8oz) |
| Simplex |  | bowl | 63 barg (913psig) | 120ºC (248ºF) | 180mm x 175mm x 80mm (7¼" x 7" x 3¼") | 175g (6¼oz) | ½" BSP Female (½" Flow through core) | 1.1kg (2lb 7oz) |
| Duplex |  | bowl | 63 barg (913psig) | 120ºC (248ºF) | 221mm x 185mm x 170mm (8¾" x 7¼" x 6¾") | 175g (6¼oz) per bowl | 1" BSP Female (½" Flow through core) | 2.2kg (4lb 14oz) |