Magnom™ PumpMate: Summary
The Magnom™ PumpMate Magnetic Filter (Magnetic Suction Strainer) is specifically designed to protect hydraulic pumps on the suction side, inside the tank (reservoir).
The patented design filters the suction side of pumps. Unlike a standard Suction Strainer which really is NOT a filter Magnom™ provides the performance of a 1 micron absolute hydraulic filter cartridge on the suction side of a pump. This is accomplished without wash-off of collected particles as seen with standard magnetic filters, suction strainers or standard hydraulic filters.
This is a generational leap in technology for the protection of critical hydraulic and lubrication pumps with virtually no pressure drop or restriction to flow, even when the PumpMate unit is ‘full’ of contaminant.
With negligible risk of pump cavitation, the Magnom™ PumpMate removes fine ferrous and some nonferrous materials to sub-micron levels and has a very high contaminant holding capacity, offering OEMs and Operators a true 'fit and forget' solution.
Special Features & Benefits
- Fine filtration without risk of pump cavitation
- Negligible pressure drop & full fluid flow even when full of contaminant
- Removes ferrous and some nonferrous particles down to submicron sizes
- Contaminant storage without 'wash off' of collected particles
Applications
- Primary: Hydraulics
- Secondary: Transmissions Lubrication Oils Fuel
- Subject to application: Coolants
Technical Specifications
| Product | Description |
|---|---|
| Mounting method | Suction line |
| Flow direction | Bi-directional |
| Construction materials | |
| Housing | Acetal/Nylon 13% glass filled |
| Flux plate | Mild steel CR4 Chemically blacked |
| Magnet | Ferrite C5/C8 |
| Housing pressure & temp rating | |
| Max operating pressure | Not applicable (suction use) |
| Burst pressure | Not applicable (suction use) |
| Max temp | 100ºC (212ºF) |
| Fluid compatibility | Compatible with a wide range of petroleum oils, synthetic fluids, water-glycols, hydraulic & lubricating fluids and gases |
The PumpMate is actually a family of units offering a range of sizes, capacities & fittings.
| Part Number | Unit | Unit weight | A [dia] | B | Contaminant capacity |
|---|---|---|---|---|---|
| 555102002 555103002 555102005 555103005 555102008 555103008 555102011 555103011 555102014 555103014 555102020 555103020 |
¾" BSPP ¾" NPT 1" BSPP 1" NPT 1¼" BSPP 1¼" NPT 1½" BSPP 1½" NPT 2" BSPP 2" NPT 3" BSPP 3" NPT |
1lb 5oz (600g) 1lb 5oz (600g) 1lb 5oz (600g) 1lb 5oz (600g) 1lb 5oz (600g) 1lb 5oz (600g) 2lb 5oz (1050g) 2lb 5oz (1050g) 2lb 5oz (1050g) 2lb 5oz (1050g) 5lb 7oz (2450g) 5lb 7oz (2450g) |
3 3/8" (86mm) 3 3/8" (86mm) 3 3/8" (86mm) 3 3/8" (86mm) 3 3/8" (86mm) 3 3/8" (86mm) 4¾" (122mm) 4¾" (122mm) 4¾" (122mm) 4¾" (122mm) 7 5/16" (186mm) 7 5/16" (186mm) |
3 1/8" (80mm) 3 1/8" (80mm) 3 1/8" (80mm) 3 1/8" (80mm) 3 1/8" (80mm) 3 1/8" (80mm) 3¾" (95mm) 3¾" (95mm) 3¾" (95mm) 3¾" (95mm) 4 5/8" (118mm) 4 5/8" (118mm) |
140g 140g 140g 140g 140g 140g 200g 200g 200g 200g 400g 400g |
Industries using PumpMate
agriculture construction industrial marine offshore power pulp-paper railway steel transmission truck
